FLUX FMJ 100 Betriebsanleitung Seite 23

Attention!
Danger from splashing liquids!
The maximum operating pressure and operating temperature
•
must not be exceeded.
High operating pressure may result in the containers or the
•
hoses bursting or becoming loose. Make sure that excessive
pressure does not result when filling a container.
Fill carefully and at an appropriate speed to avoid leakage of the
•
liquid.
Caution!
Immediately inform the responsible supervisor about defects on the
device.
Caution!
Risk of injury!
Follow internal instructions.
•
Wear protective clothing (face and breathing protection, protec-
•
tive gloves, etc.).
Attention!
If the material of the flow meter is not resistant to the liquid to be
transferred, it must not be used.
Observe the chemical resistance and internal instructions.
•
Note
Always replace defective parts.
Only use genuine spare parts.
When returning the pump for repair, it must be accompanied by the
decontamination certificate (download at www.flux-pumpen.de).
Attachment FLUXTRONIC FMJ 100 23 / 60