FLUX FMJ 100 Betriebsanleitung Seite 26

Forgotten your PIN?
Reset security level [LOC] to 0 and
Reset PIN number to "000"
All other entries are retained.
1. Remove battery from the battery compartment.
2. Press the Stop key before inserting the battery and hold it down while it is being in-
serted.
When the battery capacity is almost empty, the information line shows
alternatively with the current line. When this is the case, the electronic unit
"LOW BATT"
can run normally for up to 2 weeks.
When the battery capacity is so low that processing can no longer be reliably guaran-
teed, the display only shows "LOW BATT" and the functions are no longer executed.
Software version
The version currently used is shown at [SET]->[INFO]->[01].
26 / 60 Attachment FLUXTRONIC FMJ 100