FLUX FMJ 100 Betriebsanleitung Seite 28

3.2 The Operating Concept
All of the settings are inputted using the following operating concept
Process
1. RUN
Default display
Display range: 9999.999 to 9999999
The point is moved when the respective display range is exceeded until the maximum
display is reached. The counter then starts counting again at 0.
1.1 Immediately delete volume display
With LOC 4 (setting in the [SET] group]) it is not possible to delete the volume display
immediately. For processing, first enter the PIN.
1.2 Delete volume display [DEL]
1.3 Change decimal place [DEC] 0 to 3.
1. RUN
Process
28 / 60
Select Process
(left/right
up/down)
Press key for ~ 1 second
1.2 Delete volume
display [DEL]
1.3 Change decimal
place [DEC]
Attachment FLUXTRONIC FMJ 100
.
Operate Default display
1.1 Immediately delete
volume display
Process
Select
Process
0 ... 3
RUN
Operate and
back to [RUN]