Signed And Sealed; Setting Up The Scale; Power Supply - Seca 334 Handbuch

English

Signed and sealed

With seca products, you are not only
purchasing technology which has
been perfected over 100 years, but
also quality with
certification confirmed by institutions. seca
products comply with European directives,
standards and national laws. When you buy
seca, you buy the future.
Products
symbol -meet the applicable
0123
regulatory requirements of
the European Community, especially the
following:
• Directive 93/42/EEC for medical devices
seca's professionalism is also
recognized by official testing
agencies. TÜV Süd Product
Service, the appointed office for medical
devices, confirms with this certificate that as a
medical devices manufacturer,
consistently complies with the strict legal
requirements. seca's quality
system includes the areas of design,
development, production, sales and service
of medical scales and length measuring
systems as well as software and measuring
systems for assessing state of health and
nutrition.
seca helps the environment. Saving
natural resources is very important
to us. We therefore make every
effort to save on packaging -
materials wherever it makes sense
and whatever is left over can be conveniently
disposed of on site via the recycling system.
Safety
• Follow the operating instructions.
official legal
• Never leave a baby lying on the scale
unsupervised.
• Do not drop the scale or subject it to
violent shocks.
bearing this
• Have repairs carried out only by
authorised parties.

Setting up the scale

The scale is fully assembled on delivery.
Remove the packaging and place the scale
on a firm, level surface.
seca
assurance

Power supply

The scale is powered by batteries or a mains
unit (option).
The LC display has a low power consumption
- 10,000 weighing operations can be
performed with one set of batteries. Once
battery power is no longer sufficient,
appears in the display.
Battery and mains unit (option)
bAtt
If or appear in the display, you
should change the batteries. You need six
1.5 V type AA round-cell batteries.
– Carefully turn over the scale.
– Press the tabs on the battery compart-
ment and take off the cover.
Connection for Battery
mains unit compartment
– Remove the used batteries and place
the new batteries in the compartment.
Check that polarity is correct.
– Close the cover.
bAtt
7