Maintenance - EFA VB 225 Betriebsanleitung

Turn the screw in MINUS direction until the tool
is balanced and suspended at the correct
height.
If it is not possible to pull more cable from the
pulley, it is jammed and must be readjusted.
Turn the screw in PLUS direction until cable can
be pulled from the pulley and repeat the fine
adjustment (see above).

5. Maintenance

Malfunctions that might occur during operation
can generally be eliminated very simply. The most
common malfunctions, their causes and remedies
are compiled in Table 1: "Troubleshooting".
.
Before carrying out any repairs,
disconnect the stunning device
from the compressed air hose.
All above work must be carried out
by a suitably qualified and
instructed specialist technician.
Schmid & Wezel
D75433 Maulbronn,
Page / Seite
7 / 24
Version / Ausführung
03.2006