Jet Fans (e)
13 SERVICE AND MAINTENANCE
Check the following periodically in accordance with regulatory guidelines, and at least once per year:
•
Threaded connections, in particular the attachment of the impeller
•
Check the fan wheel for dirt or dust deposits and clean as needed.
•
Check the impeller for dirt or dust deposits and clean as needed.
•
Proper functioning of safety components
•
Proper functioning of the controller system
•
Coil resistance
•
Operating current
•
Vibrations
•
Noises coming from the bearings in the electric motor
•
Check for proper functioning of the system and control (circuit breaker) in accordance with the system's
maintenance book at least every 3 months, if more frequent reviews are not specified
•
Check the first four items in this list with the fan switched off.
•
The parameters for the other items must match the parameters recorded upon initial installation.
If there is any deviation in any of the parameters, replace the motor or the fan or have the relevant component
repaired by the manufacturer.
Any unauthorized work performed on the fan or its components will void all claims under the warranty.
•
Perform regular service and maintenance on the electric motor as specified in the manufacturer's instructions
supplied with the motor.
•
Fill out the maintenance record attached in the appendix.
NO
TICE
N
OTICE
Page 14 of 19
Live cables and connections.
Danger of personal injury from electrical current.
Have all electrical work performed by a qualified electrician.
Risk of damage to the fan from use of high-pressure cleaner
Clean the fan manually, with a vacuum cleaner or with compressed air.
Risk of damage to the fan.
Systemair cannot accept liability for damage resulting from the use of parts supplied by
other manufacturers.
Use only genuine Systemair parts.
Systemair GmbH, Seehöfer Str. 45, 97944 Windischbuch
Phone: +49 (0) 7930/ 92 72 0, Fax: +49 (0) 7930/ 92 72 92
E-mail: info@systemair.de, Internet: www.systemair.com
Status: 14.10.2008