Cleaning And Maintenance; Storage, Transportation - CMi C-ERM-1200/32 Originalbetriebsanleitung

Rasenmaeher_Elektro_302150_115215.book Seite 32 Freitag, 23. Oktober 2015 8:46 08
GB
– Pull the extension cable through the
cable grip (3) as illustrated.
– Insert the extension cable coupling into
the mains.
Switching on the product
► P. 6, item 8
– Press the operating safety lock (8) and
hold down.
– Pull and keep hold of the operating
lever (1).
– Release the operating safety lock.
The unit will switch itself on with approxi-
mately 2 seconds delay.
Switching-off the device
– Release the switch on lever.
Mowing
DANGER! Risk of injury! Before
starting work, check the area and
remove all objects which may be
kicked up by the unit.
– Guide the unit at an even, slow pace
(walking speed) and with as straight a
path as possible.
Important notes
• Always work at right angles to the slope.
• Try not to cut grass when wet.
• Use overlapping paths to produce an
even cutting pattern.
• Cut longer grass with a greater cutting
height initially, then cut crosswise using
the desired cutting height.

Cleaning and maintenance

DANGER! Risk of injury! Carry out
the maintenance work described
here in person.
Improper maintenance work can
damage the device and lead to inju-
ries.
Cleaning and maintenance overview
Before each use
What? How?
General function Visual check.
check.
Check all screw
connections and
tighten if neces-
sary.
32
Cleaning the device
Clean unit immediately after every use. Dried
grass remains are very hard, and are very dif-
ficult to remove.
– Remove grass remains with a brush, and
a plastic scraper if required (do not use
sharp implements).
– Remove deposits on the wheels.
– Wipe the tool with a damp cloth.
– Never clean the unit with water or high-
pressure jet.
Changing the blades
DANGER! Risk of injury! Never
touch the blade on the cutting edge.
Wear gloves at all times when work-
ing with the blade.
Removing
► P. 6, item 9
– Loosen screw (14).
– Carefully remove the blade (15).
Installing
Install in reverse.
NOTICE! Risk of damage to the
device! Pay attention to the rotation
direction of the blade (arrow).

Storage, transportation

Storage
DANGER! Risk of injury! Store the
unit in such a way that it cannot be
started by unauthorised persons.
Ensure that no one is able to hurt
themselves on the stored unit.
NOTICE! Risk of damage to the
device! Do not stored unprotected in
a damp environment.
– Clean unit before storing.
– Store the tool in a dry and well ventilated
place.
Transportation
– When dispatching, try to use the original
packaging, if possible.