Eufab 16465 Bedienungsanleitung Seite 5

• The dual induction charger may not impair the vision of the vehicle driver.
• The driver may not be obstructed by the dual induction charger.
• The dual induction charger may not be mounted in the vicinity of the air bags or on head impact zones. To do this, read the
manual of your vehicle or ask your specialist workshop.
• Supervise the charging process.
• Use only suitable chargers or USB connectors for charging.
• To remove the cable, always pull on the plug itself, never on the cable.
• The StVZO (German Road Traffic Regulation or equivalent) must be observed when using in traffic.
• Keep bank cards, credit cards and other similar magnetic cards away from the inductive charger. Magnetic cards may be
damaged and the data saved on them may be lost.
5. Explanation of symbols
Complies with EC directives
6. Operating instructions
6.1 Overview
1 Charging zone 1
2 Charging zone 2
3 Micro-USB C - socket
4 Micro-USB C - connector of connection cable
5 USB – connector of connection cable
6.2 Use
Place the dual induction charger on the dashboard or centre console of your vehicle. Choose as even a surface as possible. Pay attention to the
safety precautions detailed in section 4. Plug the Micro-USB C connector (Position 4 in the overview) of the charging cable into the socket of the
dual induction chargers (Position 3 in the overview).
Connect the USB connector (Position 5 in the overview) of the charging cable to a USB port of your vehicle or with a USB vehicle charger. The dual
induction charger is now ready for use.
To charge, place your smartphone on both charging zones (Positions 1 and 2 in the overview) of the dual induction charger. The charging process
is started automatically.
Separate the dual induction charger from the on-board network of your vehicle when the motor is switched off, otherwise the battery
may be drained.
7. Maintenance and care
When used as directed, the dual induction charger is maintenance-free.
Clean the dual induction charger with a soft, dry cloth only. Do not use cleaning agents. Never allow liquids to get into the housing.
8. Notes regarding environmental protection
Do not dispose of electrical devices with the household waste! Electrical devices and electronic scrap must be collected separately and
disposed of in an environmentally responsible manner for recycling. Please contact your local council or city administration regarding
disposal options for electrical devices and electronic scrap.
9. Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
Labelled electrical products may not be disposed of with household waste
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Image 1: Overview
info@eal-vertrieb.com
www.eal-vertrieb.com
5