Turntable Operation - auna Oakland DAB Bedienungsanleitung

EN
42

TURNTABLE OPERATION

1. Open the dust cover and turn the volume knob clockwise to turn the
equipment on.
2. Use the function selector to select PHONO mode.
3. Set the speed selector to the appropriate position: 33, 45 or 78,
depending on the record to be played.
4. Set the auto stop control to ON if you want the turntable to stop turning
when it has reached the end of the record. If the switch is set to OFF, the
turntable will continue turning at the end of the record.
5. Place the record on the turntable (use the 45 rpm adaptor, if required).
6. Move the lift lever towards the back to raise the tone arm from the arm
park, then slowly move the arm to the record, as illustrated on the right.
The turntable will start rotating.
7. Move the lift lever towards the front, the tone arm will gently drop onto
the record and playback will start.
8. To stop playback, move the lift lever towards the back to raise the tone
arm. The turntable will still be rotating but the record will stop playing.
To continue playback, move the lift lever towards the front.
9. To play a different piece on the record, move the lift lever towards the
back, move the raised tone arm to the start of the piece and then move
the lift lever towards the front to lower the tone arm and start playback.
10. To adjust the volume level, turn the volume knob to the right or left.
11. At the end of the record, move the lift lever towards the back to raise the
tone arm and move it back to the tone arm park, and then move the lift
lever towards the front to lower the arm onto its rest.
12. Alternatively, lift the tone arm off the record and return it to the arm rest
manually.
13. When you have finished playing records, engage the tone arm lock
to protect it from accidental movement. Turn the volume knob in a
counterclockwise direction to switch the unit off. Unplug it from the
power supply if you are not going to use it for a while.#
NOTE: Should your record stop before the last track finishes, set the auto
stop control to OFF. Your record will now play to the end, but you will
have to stop the turntable rotation manually. (Return the tone arm to its
rest manually and if the turntable is still rotating, switch off the unit by the
volume control knob. Then set the auto stop control back to ON.)