Operation - auna Connect 150 MKII Bedienungsanleitung

EN
42

OPERATION

POWER ON/OFF
When you first connect the unit to the mains socket, the unit will be in
standby mode after showing "auna"
POWER button
Main unit operation:
1. Press the Power button for Turn on the Internet radio
2. Press hold the Power button for 2 seconds to switch 'standby'
Remote control operation
1. In Off (standby) mode, tap the POWER Button on remote control to turn
the unit ON. The unit will turn on.
2. To turn the unit (standby), tap the POWER button on remote control
again.
Adjusting and muting the volume
Turn the Volume dial to increase or decrease the volume.
EQ operation
You can enjoy different EQ sound effect modes.
1. Press and hold the MENU button on main unit or remote control and
turn and press the Select dial to select 'System settings'.
2. Turn and press the NAVIGATE dial to or use the Select up/down buttons
on the remote control to select the 'Equalizer'.
3. Press the OK Button on main unit or remote control to select.
4. Turn and press the NAVIGATE dial to or use the Select zp/down buttons
on the remote control to choose between 'Flat', 'Jazz', 'Rock', 'Movie',
'Classic', 'Pop'.
Setting the bass and treble manually
1. Press and hold the Menu button to view the main menu.
2. Turn and press the Select dial to select 'System settings' > 'Equalizer' >
'My EQ setup'.
3. Turn and press the Select dial to choose 'Bass' or 'Treble'.
4. Turn and press the Select dial to set the level from '-6dB' (low) to '+6dB'
(high).