auna Oakland DAB Bedienungsanleitung Seite 47

Playback controls
PLAY/PAUSE Press this button once to stop playing, press it again to continue
STOP Press this button to stop audio playback, the display will then
show the total number of MP3/WMA files.
SKIP UP Press this button once to play the next file, press and hold this
button to fast forward through the files/tracks.
SKIP DOWN Press this button once to play the previous file, press and hold
this button to fast reverse through the files/tracks.
TUNING KNOB Turn this knob to the right/left to search a folder backward or
forward.
MODE Press this button to toggle between USB and SD Card mode.
Important notes
• The system can detect and read files in MP3 / WMA format only via the
USB port or SD card slot.
• You can connect an MP3 player to the system via the USB socket,
however, some MP3 players may not be able to play via the USB
socket. This is due to variances in the MP3 encoding format; it is not a
malfunction of the system.
• There are numerous USB and SD device producers and their products
vary in solution and format. We therefore cannot guarantee that this
unit will support all USB and SD devices from every brand.
• This system supports SD cards up to 8GB.
• MP3 / WMA track format requirements:
• MP3 bit rate: 32 kbps~256 kbps; WMA bit rate: 32 kbps ~ 320 kbps.
Programming tracks for playback
Up to 64 tracks can be programmed for MP3 / WMA file playback in any
order. Before programming, however, be sure the system is in STOP mode.
1. Set the function selector to CD/ USB/SD mode, then press the stop
button.
2. Press the program PROG button, MEM will be flashing on the LC
display, and it will indicate the program number and digits for the track
number to be programmed.
3. Press the SKIP UP
4. Press the program PROG button to store the track into the
memory.
or SKIP DOWN button to select a desired track.
EN
47