Cleaning And Care; Storage - Silvercrest SSHK 100 E4 Bedienungsanleitung Und Sicherheitshinweise

Cleaning and care

LIFE BY ELECTRIC SHOCK! Always
remove the mains plug from the socket
and the plug-in connector
from the heating pad (see fig. B) before cleaning
the heating pad. Otherwise there is a risk of
electric shock.
Use a dry, lint-free cloth for control unit
ning and care.
RISK OF DAMAGE TO THE PRO-
DUCT OR PROPERTY! Never im-
merse the control
liquids. It may otherwise be damaged.
If the heating pad is slightly soiled, use a dam-
pened cloth and a little liquid mild detergent, if
necessary.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Do
not use chemical cleaning or scouring
agents to clean the heating pad and control
The heating pad and control unit
wise be damaged.
The heating pad is machine-washable.
Set the washing machine at an extra
washing cycle for delicate items at
30 °C.
For ecological reasons, please only wash the
heating pad together with other textiles. Use a
mild laundry detergent according to the
manufacturer's instructions.
Please note that frequent washing will cause
wear to the heating pad. It should therefore be
washed no more than max. 10 times in a washing
machine throughout its useful life.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Please
note that the heating pad may not
be dry cleaned, bleached, wrung out, dried
mechanically, mangled or ironed. The heating
pad may otherwise be damaged.
Do not use bleach. Do not use any
cleaning agents containing bleach
(such as heavy duty detergents).
Do not dry in a tumbler dryer.
DANGER TO
with the control
3 1
clea-
1
in water or other
1
.
1
may other-
1
Cleaning and care / Storage
Do not iron.
Do not dry clean.
Reshape the still damp heating pad to the origi-
nal size immediately after washing, and dry flat,
spread on a clothes drying rack.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Do
not hang the heating pad up to dry
with pegs or similar. The heating pad may other-
wise be damaged.
DANGER OF ELECTRIC SHOCK!
Do not reconnect the control
the heating pad until the plug-in con-
nector and the heating pad are completely
3
dry. Otherwise there is a risk of electric shock.
DANGER OF ELECTRIC SHOCK!
RISK OF PROPERTY DAMAGE!
Do not under any circumstances switch
the heating pad on to help it dry. Otherwise
there is a risk of electric shock.

Storage

RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Let
the heating pad cool before putting
it away. The heating pad may otherwise be da-
maged.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! To
prevent the heating pad from beco-
ming sharply creased, do not store other objects
on top of the heating pad. The heating pad may
otherwise be damaged.
If you do not intend to use the heating pad for
any length of time, store it in the original packaging
in a dry environment and without weighing it
down.
Disconnect the plug-in connection
control unit from the heating pad to do so.
1
to
1
and the
3
GB/IE 21