Klarstein Crossfire Bedienungsanleitung Seite 18

EN
18
OPERATION
Lighting the grill
1. Turn control knob to the 'OFF' position.
2. Connect the gas cartridge to the rotisserie grill following the instructions.
3. Turn on the gas supply at the regulator switch knob anti-clockwise "+" to max
position.
4. To light the burner, push down and turn the burner control knob to 9 o'clock
position, wait for maximum 5 seconds and press the piezoelectric igniter button
once. Keep the control knob pushed for further 5-20 seconds until the burner starts
to glow.
5. lf the burner has not lit after two attempts, turn off the control knob and wait 5
minutes before retrying the ignition sequence.
6. When the burner has lit, the burner rate can be adjusted by turning the burner
control knob anti-clockwise to any position between MAX (
positions.
7. To turn off the grill, turn the regulator switch knob clockwise "-" to min position.
Once the burner has extinguished, turn the control knob to the "OFF" position.
IMPORTANT: lf the burner has not lit after several attempts, consult your gas dealer,
or the store where you purchased the rotisserie grill, or a qualified service provider for
assistance or repair. Never try to rectify the problem yourself.
Piezoelectric igniter
Control knob
) and MIN( )