Symbols Used; Documentation; Rtm 430; User Instructions - Bosch RTM 430 Produktbeschreibung

en 12 | RTM ��� | Symbols used
1.

Symbols used

1.1

Documentation

Pictograms linked with the key words Danger, Warning
and Caution are warnings and always indicate an imme-
diate or potential hazard to the user.
Danger!
Immediate danger that could cause serious
personal injury or death.
Warning!
Potentially dangerous situation that could
cause serious personal injury or death.
Caution!
Potentially dangerous situation that could
cause personal injury or damage to property.
!
Important – warns of a potentially hazardous situa-
tion in which the RTM 430, the test sample or other
object in the vicinity could be damaged.
In addition to these warnings, the following symbols are
also used:
i
Info – In addition to these warnings, the following
symbols are also used.
¶
Single-step procedure – instructions for a procedure
that can be completed in just one step.
? Intermediate result – an intermediate result is dis-
played during a procedure.
"
Final result – the final result is displayed at the end
of the procedure.
1.2 RTM ���
Disposal
Old electrical and electronic devices, including
cables and accessories or batteries must be
disposed of separate to household waste.
|
1 689 979 651 2009-04-06
2.

User information

2.1

Important notes

Important information on copyright, liability and warranty
provisions, as well as on equipment users and company
obligations, can be found in the separate manual "Important
notes on and safety instructions for Bosch Test Equipment".
These instructions must be carefully studied prior to start-
up, connection and operation of the RTM 430 and must
always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Test Equipment". These instruc-
tions must be carefully studied prior to start-up, connec-
tion and operation of the RTM 430 and must always be
heeded.
2.�

Electromagnetic compatibility (EMC)

The RTM 430 satisfies the requirements of the
EMC directive 2004/108/EG.
i
The RTM 430 is a class/category A product as
defined by EN 55 022. The RTM 430 may cause
high-frequency household interference (radio inter-
ference) so that interference suppression may be
necessary. In such cases the user may be required to
take the appropriate action.
Robert Bosch GmbH