Front Injector TMS-VI
6.2 Connecting the pneumatic system
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Cut the power to the work area of the robot.
• Switch off the power source.
WARNING
Risk of injury
Physical injury due to skin or eye contact with anti-spatter fluid being
expelled suddenly.
• De-pressurize the Front Injector TMS-VI.
• Wear protective gloves and safety goggles.
14
Fig. 5
Connecting the pneumatic system
Fig. 4 Putting into operation on page EN-12
1 Connect a compressed air-hose with an inner width of at least 4 mm to
the 5/2 directional valve (4).
LW 4
6x1
4
2
14
12
12
1 3
5
6 Putting into operation
LW 4
6x1
EN - 13