Abicor Binzel TMS-VI Betriebsanleitung Seite 35

Front Injector TMS-VI
6.4 Setting the spraying quantity
WARNING
Risk of injury
Physical injury due to the robot moving unexpectedly during
teaching.
• Keep your hands out of the danger zone during teaching.
WARNING
Risk of injury
Physical injury due to skin or eye contact with anti-spatter fluid being
expelled suddenly.
• Depressurise the Front Injector TMS-VI.
• Wear protective gloves and safety goggles.
 Fig. 4 Putting into operation on page EN-12
1 Make sure that the bottle contains a sufficient amount of anti-spatter agent.
NOTICE
• Make sure that the spraying time and the metered amount are adequate
for the amount of spatter formation.
2 Set the spraying quantity by turning the flow regulator (1).
6 Putting into operation
EN - 15