Connecting The Pneumatic System - Abicor Binzel TMS-VI Betriebsanleitung

Front Injector TMS-VI

6.2 Connecting the pneumatic system

6.3 Establishing the electrical connection
14
Fig. 5 Connecting the pneumatic system
WARNING
Risk of injury
• Depressurize the Front Injector TMS-VI.
 Fig. 4 on page EN-8
1 Connect the compressed-air hose to the 5/2-way valve (4) using an inner
diameter of at least 4mm.
 Fig. 4 on page EN-8
1 The electrical connection at the 5/2-way valve (4) is done directly at the
device socket using a suitable cable.
NOTE
• The operating voltage must be identical to the output voltage of the
control system.
LW 4
6x1
4 2
14 12
12
1 3
5
6 Putting into operation
LW 4
6x1
EN - 9