Abicor Binzel TMS-VI Betriebsanleitung Seite 40

11 Disassembly
11 Disassembly
EN - 20
CAUTION
Risk of injury
Physical injury due to parts falling or spinning around.
• Avoid abrupt lifting and setting down.
• Transport the components in an upright position.
• Do not lift the components over persons.
• Wear your personal protective equipment: safety shoes with steel toe
caps, protective work gloves.
NOTICE
• Disassembly must only be carried out by qualified personnel (in
Germany, see TRBS 1203).
• Please consult the operating instructions for the welding components,
such as the welding power source and the robot control unit.
• Observe the information provided in the following section:
 8 Putting out of operation on page EN-17
 Fig. 4 Putting into operation on page EN-12
1 Loosen the cylinder head screws (2).
2 Remove the parts to be disconnected.
Front Injector TMS-VI