Putting Into Operation - Abicor Binzel TMS-VI Betriebsanleitung

Front Injector TMS-VI

6 Putting into operation

DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Cut the power to the work area of the robot.
• Switch off the power source.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and
possible damage.
• Replace any damaged, deformed or worn parts.
WARNING
Risk of injury
Limbs can be crushed and cut off.
• Use an appropriate lifting tool with load securing devices for transport
and installation.
NOTICE
• Please take note of the following instructions:
 3 Product description on page EN-7
• The Front Injector TMS-VI may only be put into operation by qualified
personnel (in Germany see TRBS 1203).
• Components must only be used in environments with sufficient ventilation.
• Please also consult the operating instructions for the welding
components, such as torch cleaning station, power source, etc.
6 Putting into operation
EN - 11