Use And Operation - Klarstein Bern Handbuch

EN
44

USE AND OPERATION

Notes on setting the timer
Use the TIMER button
Note: You can not set the weekly timer by the control panel, but you can set the
day timer. The day setting time is 30 (min) - 1H - 2H - 3H ... up to 8H. The previous
screen display shows the settled number (1/2/3...8) and later shows H (Hour). By
remote control you can set both the day and weekly timer, the specifications are as
below.
Set present date and time
To set the present time the appliance must be turned off, but the power must be on at the
socket.
1. Press and hold the TIMER button for 5 seconds until the first two digits start flashing.
Use the [+] and [-] buttons to set the current year (e.g. 18 for 2018).
2. Press the TIMER button a second time until the back digits start flashing. You can
now set the month using the [+] and [-] keys (e.g. 7 for July).
3. Press the TIMER button a third time until the first two digits start flashing. Use the [+]
and [-] keys to set the date (e.g. 10).
4. Press the TIMER button a fourth time until the rear digits start flashing. Use the [+]
and [-] keys to set the day of the week:
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
5. Press the TIMER button a fifth time until the first two digits start flashing. Use the [+]
and [-] buttons to set the hours (e.g. 10).
to turn on the daily or weekly timer.