Control Panel And Remote Control; Key Functions - Klarstein Bern Handbuch

EN
42

CONTROL PANEL AND REMOTE CONTROL

1 On/Off
2 Heater
3 Timer
4 Brightness

KEY FUNCTIONS

Power Button
This button will not only put the fireplace insert in a standby mode, but
also you can see the flame effect through the screen. This will turn off all
functions at once.
Heater
The fireplace contains a fan forced heater. The default setting temperature
is 72°F (22°C). The thermostat setting range is
50°-86°F or 10°-30°C. The thermostat is adjustable by 2°F or 1°C
increments. To change between °F and °C press and hold the Heater
button for 5 seconds.
5 Child safety lock
6 Plus
7 Minus