Use And Operation - Klarstein 10031558 Bedienungsanleitung

• This appliance is not intended for use by persons (including children) with reduced Physical, sensory or men-
tal capabilities, or lack of experience and knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not lift the appliance by the front panel.
• The heater must not be located immediately below a socket outlet.
• Keep top of heater at least 1000mm away from ceiling or other objects for optimum heat ventilation.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit that is regu-
larly switched on and off by the utility.
• WARNING: This heater is not equipped with a device to control the room temperature. Do not use this hea-
ter in small rooms when they are occupied by persons not capable of leaving the room on their own, unless
constant supervision is provided.
• Children of less than 3 years should be kept away unless continuously supervised.
• CAUTION- Some parts of this product can become very hot and cause burns. Particular attention has to be
given where children and vulnerable people are present.
Before first Use
• Unpack the heater carefully and retain the packaging for possible future use.The heater are normally posi-
tioned against a wall.
• A choice of 1kW or 2kW heat output is provided by the heater, which is located at the bottom of the heater.
• Before connecting the heater check that the supply voltage is the same as that stated on the heater.
Note: Used in an environment where background noise is very low, it may be possible to hear a sound which is
related to the operation of the flame effect. This is normal and should not be a cause for concern.
Operation
The heater controls are located behind the metal plate on the front of the heater. Four switches provide a
choice of heat settings.
7

Use and Operation

Switch 1: Main switch
Switch 2: ON/OFF switch
Switch 3: Heat at 1000 W
Switch 4: Heat at 1000 W