Operation; Vibration Measurement - PCE -VM 20 Bedienungsanleitung

4.2.3 Unit
The "Units" setting is "metric" and cannot be changed.
4.2.4 Automatische Power Off
In the sub-menu "Settings", navigate to "Auto OFF" by using the
keys and confirm with Enter
keys and confirm your entry with
Doc Fields...
4.2.5
The setting „Doc Fields" is not available.
5

Operation

5.1

Vibration measurement

Connect the acceleration sensor AC 102-1A to connection socket 1 of
the meter. In the main menu, select "Vibrometer" by using the
and confirm your selection with Enter
Selection
Now select one out of four measuring modes. To do so, navigate up and down with the
to highlight the desired mode. If you wish to previously change the settings for the selected
parameter, press the Menu key
press Enter to enter measurement mode.
Measuring mode
Acceleration
Velocity
Displacement
ISO 10816
. Set the desired power off time with the
.
.
(See 5.1.1). If you do not wish to change the setting, directly
Description
Vibration acceleration [mm/s
Vibration velocity [mm/s]
Vibration displacement [µm]
Analysis mode according to the standard ISO 10816 [mm/s]
© PCE Instruments
22
keys
2
]
keys