PCE -VM 20 Bedienungsanleitung Seite 32

5.1.4.2 How to make a route measurement
Connect the acceleration sensor to connection socket 1 of the meter and
attach the measuring head of the sensor to the measurement spot on the
machine. In the main menu, use the navigation key
"Documents" and confirm with Enter
"Documents" and confirm with Enter
Select the route point with the
images, the route points are numbered by "point ..." in the upper left
corner. Start the route measurement by pressing Enter
measurement mode, the readings are collected in line with the set
parameters.
Wait until "100 %" is displayed on the screen. The file is saved to
"Documents". To leave route measurement, press the Back key
. Find the route file (routes.src) in
. The file could be in a subfolder.
keys. As you can see from the
. In route
© PCE Instruments
29
to go to
.