Optionen; Option 'Shadecover - Fronius 10.0-3 208-240 Installationsanleitung

Optionen

Optionen
OPTION
‚ShadeCover'
HINWEIS!
A DIN rail is provided in order to mount
accessory electrical devices including,
but not limited to, overcurrent protecti-
on, metering, radio or cellular modem.
Maximum size for mounting of all devices is
4w x 4,75l x 2,75 inches. The installer takes
responsibility for any undesired effect on
the inverter by installing an electrical device
in this area, caution should be taken when
installing a device that may output signifi-
cant amounts of heat or radio interference.
Always insure that the device does not inhi-
bit the inverter from closing and sealing pro-
perly. Any questions about device eligibility
should be directed toward technical sup-
port.
- Use the ShadeCover when the inverter
is exposed to direct sunlight
- Use 4 screws for proper mounting
NO MOUNTING
61