Step 10 Attaching The Front Lights - Babboe Curve Montageanleitung

Step 10
INSTALLING THE FRONT LIGHTS
PARTS
• 2 front lights (box II)
The delivered front lights must be installed underneath the steps at the front of the box.
36
1. Slide the bracket of the light on the section of frame tubing under the step,
as shown in figure 36.
2. Use the adjuster at the bottom of the bracket to secure the holder to the frame tube
(which detail AC).
3. Then slide the light itself onto the clip of the bracket.
Note: The lights can be operated via the hole in the step.
74
AC