Step 7.4 Installing The Side Panels - Babboe Curve Montageanleitung

Step 7.4
INSTALLING THE SIDE PANELS
PARTS
• 2x Side Panels
• Sachet F (6x M6 bolts, 6x M6 cap nuts,
6x 6 spring washers, 12x M6 washers, 2x small brackets)
24
Please note
When installing the side panels, make sure that the logo on the side panels is on the
outside of the cargo box.
1. Attach both side panels to a connection profile (rear) using one bolt in the bottom
attachment hole (detail M) and two bolts with the two brackets in the middle holes
(detail L).
Please note
Adhere to the specified order for nuts, bolts and washers, etc. to ensure optimal assembly.
See detail L and M for the correct order.
64
L
M
TOOLS
• Spanner # 10
• Phillips screwdriver