Step 8.2 Installing The Seat Belts - Babboe Curve Montageanleitung

Step 8.2
INSTALLING THE SEAT BELTS
PARTS
• Four sets of 3-point seat belts
• Sachet L (4x M6 bolts, 4x M6 cap nuts,
4x M6 spring washers, 8x M6 washers)
• Sachet M (8x rubber rectangular 'eyelets')
34
1. Pull each buckle at the end of a seat belt through a rubber "eyelet" from sachet M
(see detail W). Then pull the buckles through the holes in the rear panel, as shown
in detail X.
2. Turn the buckles 90 degrees so they are positioned as shown in detail Y. The seatbelt
is now securely in place.
Attach the other end of the seat belt to the bench as shown in detail Z.
3.
Please note
Adhere to the specified order for nuts, bolts and washers to ensure optimal assembly.
4. Repeat the previous steps for the other three-point seat belts.
72
W
X
Y
TOOLS
• Spanner # 10
• Phillips screwdriver
Z