Step 2 Installing The Front Wheels - Babboe Curve Montageanleitung

Step 2
INSTALLING THE FRONT WHEELS
PARTS
• 2x Front Wheels (20 inch) (box I)
1. Remove the two nuts/washers from the wheel axle. Keep them handy.
2. Carefully place the front frame on its side.
2
3. Place the wheel into the front frame as shown in figure 2. Make sure that the
protruding part of the brake lever/hub first fits into the corresponding attachment
bracket (see detail C).
Please note
The attachment point is located in different places on the two wheels, so the braking
mechanism is always situated to the left of the wheel axle.
C
TOOLS
• Spanner # 15
49