Devon & Devon Duke Montageanleitung Seite 14

4)
Tighten the nut until the
leg is locked rigidly on the
structure.
6)
Mark the position of the
holes on the wall for fastening
the structure (2 on each side).
5)
Repeat the above operations for
both legs and lean the structure you
have just assembled against the wall.
Use a level to check that the
structure is positioned correctly in
both a parallel and perpendicular
position to the wall.
7)
Using the Allen wrench
remove the spacer bar on the
back of the structure, slackening
the two screws fastening it.
15
E
N
G