Casualplay base fix baby 0+ Bedienungsanleitung Seite 13

· After an accident the base should be inspected or replaced.
· Make sure that the fold down seat or the doors of the vehicle can not damage
any part of the base.
· The inside of the vehicle can reach very high temperatures in sunlight. It is
advisable to cover the base when it is not in use, to prevent it from possibly
burning the child.
· The straps should never be twisted.
· Always use the child restraint system, even on short journeys, and never leave
the child unattended in the vehicle.
· Take the base out of the vehicle when it is not going to be used and keep it
out of the reach of children.
· It is advisable to securely fasten any luggage or objects that may cause injury
in the event of a collision.
· We guarantee the safety of the product when it is used by the original buyer,
do not use second hand safety seats or devices.
· The other passengers in the vehicle should also be secured with their seat belts,
as in the event of an accident they may get flung about and injure the baby.
· Regularly inspect the clasp, harness of the Base Fix Baby 0+ and other elements that
may become loose or suffer from wear and tear through use.
· Remember that you are responsible for the child's safety.
User Instructions
Fitting the Base Fix Baby 0+
IMPORTANT: Consult the instruction manual of your vehicle to locate the position
of the ISOFIX fastening points. If in doubt consult your car dealership.
• Position the clips in front of both ISOFIX slots, which are situated between the seat and
the backrest (fig. 1).
NOTE: If the vehicle came supplied with these connectors, it is not necessary to
assemble them.
• Unfold the support bar (fig. 2).
• Press the Isofix connectors extraction button (fig. 3), found on the front part of the base.
• Position the Base Fix Baby 0+ on the vehicle seat. Position the connectors of the base
in front of the Isofix fasteners of the vehicle and fasten them, a green indicator will
appear on each of the Isofix connectors of the base (fig. 4), showing that it has been
fitted correctly. Check that they are secure by pulling the base.
• Next, press the Base Fix Baby 0+ against the seat (fig. 5), until it is firm against the
backrest of the vehicle.
11