Master F-15 Benutzeranleitung Seite 77

4.8.2 Unfolding
Put the folded treadmill in a capacious position when you want to run.
4.8.3 Transport
Carefully lift the treadmill at the rear roller area, grasping the two side end caps, and roll the treadmill away.
4.9 Programmable Operations
This treadmill offers 3 user programs (C1, C2, C3) and 12 present programs (P1,P2, P3......P12, see
attachment). The first 9 preset programs (P1 to P9) are only for speed; the last 3 preset programs (P10 to P12)
are a combination on speed and incline. Be careful when using the last 3 present programs as they are designed
for advanced users. Children under 16 years of age are not recommended to use the last 3 preset programs.
Each preset program has a maximum speed level that is displayed when a desired workout is chosen. The speed
that the particular program will achieve will be displayed in the Speed window. Each program has various
speed changes throughout.
4.10 To Select a Program
 Make sure the machine is in the stop position, single press 'clear/set' to enter into resetting state. Press
'MODE' to choose desired program (P1,P2, .....P25), then press and release 'START/STOP' to begin the
program with default values.
 The speed window will now be showing the preset speed of the selected program.
 Each program will continue 10 minutes. After every one minute program and speed can be altered
manually or automatically. 3 Seconds before the ending of program a buzzer will sound three times, then
the running belt will come to a stop.
4.11 User Program
In the resetting state, select C1, C2 and C3 by pressing the 'mode' key once. Then press 'clear/set', the display
for 'time' and 'speed' will be flashing at the same time. (Note: the incline window will show the time
temporally).
Press 'mode' to adjust the time with default value of 10 minutes (the time will vary every two minutes).
Press "+" or "-" to adjust speed contrary to the selected time period.
Repeat the above two processes until all the parameters have been programmed.
Press and release the "START/STOP" key, the running belt will then start to run according to the workout
created. (NOTE: THIS PROGRAM WILL BE SAVED TO THE TREADMILL MEMORY FOREVER).
77
EN