Birdies - Albrecht AE 69 H Bedienungsanleitung

Cleaning
• Switch off the unit and take out batteries before cleaning.
• Clean the outside of the scanner with a mild detergent.
• To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCD window.
• Do not use excessive amounts of water.
Repairs
Do not attempt any repair. The scanner contains no user
serviceable parts. Contact the ALAN Customer Service
Center phone (+49) (0)6103 9481 30, send an e-mail to
service@alan-germany.de or take the scanner to a qualified
and authorized repair technician.

Birdies

All radios can receive "birdies" (undesired signals). If your
scanner stops during Scan mode and no sound is heard, it
might be receiving a birdie. Birdies are internally generated
signals inherent in the electronics of the receiver.
Press L/O to lock out the channel, then press Scan to resume
scanning.
If you still cannot get satisfactory results while using your
scanner or if you want additional information, please contact
the ALAN technical hotline. The address and phone number
are listed in the warranty chapter at the end of this manual.
24