10 EN – USA quick installation guide
(3BFE64059629 [English]), available on the Internet at
www.abb.com/drives/documents.
Select the power cables
Size the power cables according to local regulations to carry the nominal current
given on the type designation label of your drive.
Typical power cable sizes are listed in table
sizing, see the hardware manual.
Ensure the cooling and the drive and input power cable
DA
See the table below for the losses, cooling air flow through the drive and UL class T
fuses for branch circuit protection per NEC. The allowed operating temperature range
USA
of the drive without derating is -15 to +40 °C. Check that the operating time of the
fuse is below 0.5 seconds.
DA
DE
ES
FI
FR
IT
NL
PT
RU
SV
TR
CN
K
on page 100. For the conditions of the