Stand-Alone Mode - EuroLite MULTIFLOOD PRO IP RGBW Wash & Frost Bedienungsanleitung

Stand-alone mode

Automatic mode
In automatic mode, various show programs are available that run at an adjustable speed. Additionally, a
desired color can be set.
1 Press the DOWN button so many times until CFXX (color fade), CCXX (color change) or CSXX (color
presets) is indicated in the display. Use the buttons UP and DOWN to select the desired show program.
Confirm with the ENTER button.
2 You can now set the speed for the programs CFXX (color fade) or CCXX (color change). Use the buttons
UP and DOWN to adjust the running speed of the programs from 00 (slow) to 99 (fast). Confirm with the
ENTER button.
3 For the program CSXX (color presets) use the buttons UP and DOWN to set the desired color from 00 to
19. Confirm with the ENTER button.
Individual color setting
Here you can set the brightness of each of the four-color LEDs individually.
1 Press the DOWN button so many times until r000 is indicated in the display. Confirm with the ENTER
button.
2 The display now indicates the brightness values (000 – 255) of the color red. Use the buttons UP and
DOWN to set the desired brightness level.
3 Confirm with the ENTER button. You can now continue by setting the brightness of the color green
(G000), then blue (b000) and white (E000).
dEMo
This setting enables you to run an internal program in a continuous loop.
1 Press the DOWN button so many times until dEMo is indicated in the display. Confirm with the
ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
Press the DOWN button so many times until Soun is indicated in the display. Confirm with the ENTER
button.
Setting the dimmer speed (step response)
1 In order to set the dimmer speed, press the DOWN button and choose dELX. Press the ENTER
button.
2 Via the UP or DOWN button, select the desired dimmer speed: dEL0 (response characteristics
LEDs) or dEL1 (response characteristics of halogen lamps).
3 Please press the ENTER button to confirm.
Wireless Setting
From factory, this device is prepared for wireless data transmission (WDMX). If you wish to de-activate
WDMX control, you can select the function "EFoF". With the function "EFoN" you can activate WDMX
control, the fixture can now receive the wireless DMX signal.
23/28 00122161.DOCX, Version 1.0