Plenums - Carrier 50CO series Installations-, Betriebs- Und Wartungsanleitungen

Side hatches for pipe connection (hydraulic connection) and damper servomotor access, as well as a grommet for the power
supply cable.

11.2.6 Plenums:

• 6XSSO\ DLULQWDNH SOHQXP + PP
Double-deflection grids
Proposed when air is to be distributed directly into a space. It is mounted on top of the unit and features double-deflection grids
(one on each side and on the front) to allow the direction of the air stream to be adjusted manually. The plenum may also be used
mounted at the bottom (UNDER) to carry air directly from a space back to the air handling system.
To mount the plenum, please refer to the diagram provided with the unit.
Do not forget to stick the adhesive gasket provided to the edge of the plenum frame that will be in contact with the unit to ensure
its tightness.
• Free-cooling plenum (Height 550 mm):
X0039,03.2015
Access hatch for junction box
and damper servomotors
Grommet for control cable
routing or for master/slave
management, as well as room
sensor cables.
Junction box
2 dampers
EN - 18
Grommet for control cable
routing or for master/slave
management, as well as room
sensor cables.
Grommet for control cable
routing or for master/slave
management, as well as room
sensor cables.
Servomotor