Documents; Safety Instructions; Warranty; Storage Of Equipment - Carrier 50CO series Installations-, Betriebs- Und Wartungsanleitungen

2.3 Documents

The following documents should be inside the unit:
- Instruction manual
- Control manual
- Wiring diagram for the unit
- Key to the wiring diagram.
- Dimensional drawing with connection diagram
- Additional diagrams depending on options

3 - SAFETY INSTRUCTIONS

4 - WARRANTY

See the general terms and conditions of sale

5 - STORAGE OF EQUIPMENT

The unit must be stored in a dry, sealed area, away from moisture and frost. The temperature in this area must not exceed 50°C.

6 - HANDLING

The unit must be handled either with a pallet truck or using a spreader beam and slings. This operation must be carried out by
qualified personnel: refer to the information on the label affixed to the equipment.
Appropriate PPE
must be worn when servicing the units
The unit must be installed and maintained by a qualified, experienced technician.
Follow the operating precautions to the letter when carrying out work on the unit.
Labels have been placed on the unit to remind you of the safety instructions.
As a general rule, follow all applicable safety regulations and standards.
Warning: The unit must be handled with care and kept vertical.
In all cases, the unit must be raised by its base.
Handling with a pallet truck
(Personal Protective Equipment)
Warning
EN - 3
EN
X0039,03.2015