Expolite TourROD RGB MK2 Bedienungsanleitung Seite 24

Key locks: activates or deactivates the password protection of the fixture. If set ON the
fixture is password protected when started. 30 seconds after the last setting the menu is locked
again. To be able to make changes in the menu the password DOWN - UP - DOWN - UP - ENTER
needs to be typed in.
REMOTE: activates (ON) or deactivates (OFF) the possibility to control the fixture with the provided
remote control.
Display: defines whether the display illumination stays active for 30 seconds after the last input
(30S) or remains lucent all the time (ON).
RESET: sets all editable settings back to factory default.
REFRESH RATE: gives the user the possibility to adjust the PWM frequency of the leds (600HZ/
1200HZ/4800HZ/9600Hz).
Max temp: the maximum operating temperature of the fixture can be set in this submenu. If this
temperature is exceeded the fixture will reduce the output of the LEDs automatically.
Info Menu
MENU
PERSON INFO
In the info menu (INFO), submenu Software VER the currently installed firmware version is shown.
In the submenu WORKING times the previous working hours of the fixture can be reviewed.
In the submenu RDM, submenu UID the RMD-ID of the fixture can be found.
V1.0.0
Software VER HSIC
WORKING times HSIC XXh XXm
HSIC RDM UID
E-24
35xxxxxxxxxxxx