GEZE Slimdrive SD Zusatz-Montageanleitung Seite 13

Integrierte Schließfolgeregelung Slimdrive SD Türblattmontage Bandseite , Datei 88340 SD_IS-T-BS_180400.p65
Saw off long rail (unless already done)
For this purpose determine and verify dimension C according to drawing on page 10!
Position:
Mount rail as illustrated, the slot of the clamping screw points to the bottom
(not visible on this illustration)
Clamping screw
(top view)
View when mounted on
View when mounted on
active leaf left
active leaf right
Prior to screwing down: Push in lever with sliding pad for the drive at the passive leaf.
Sliding pad and lever for
the passive leaf
Passive leaf view (right)
Passive leaf view (left)
Put on long rail at the transition piece of the short rail and unite.
Transition piece
Cover panel
Position above active leaf (left) Position above active leaf (right)
Screw down at the other end together with the pushed on end piece.
End piece
Position above passive leaf (left) Position above passive leaf (right)
13