Jøtul I 520 Handbuch Seite 28

ENGLISH
Table of contents
1.0 Relationship to the authorities ............... 30
2.0 Technical data for the burn chamber ...... 30
3.0 Safety ..................................................... 31
4.0 Prior to Installation ................................ 32
5.0 Installation .............................................. 32
6.0 Installation comoleted ............................ 33
7.0 Optional Extras ....................................... 33
8.0 Recycling ................................................ 33
9.0 Guarantee terms .................................... 33
10.0 Installation drawings ............................... 46
Register your fireplace at jotul.com
for a 10-year warranty.
On all our products there is a
Product:
Jøtul
label indicating the serial number
Room heater fired by solid fuel
and year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
place indicated in the installation
Emission of CO in combustion products
:
Flue gas temperature :
Nominal heat output :
Efficiency : instructions.
Operation range :
Fuel type
:
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number
Country Classification Certificate/ Approved by
standard
Norway Klasse II when contacting your retailer or
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
Jøtul.
SP Swedish National
Testing and Research
EN
EUR Intermittent
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
28
Serial no.
1.0 Relationship with
the authorities
Jøtul FS 175 is a freestanding product made of soapstone
which uses Jøtul I 520 as a burn chamber. The product
can be positioned against inflammable walls at the distances
described in fig.1a.
The installation of a fireplace must be carried out in
compliance with national laws and regulations. All
local ordinances, including those that refer to national
and European standards, must be complied with when
products are installed.
Contact your local building authorities regarding restrictions
and installation requirements.
The installation can only be put into use after it has been
checked by a qualified inspector.
The product has been tested and documented as a
freestanding stove in accordance with EN 13240.
2.0 Technical data for
the burn chamber
Materials:
Surface treatment:
Type of fuel:
Max. log length:
Smoke outlet:
Flue pipe dimension:
weight:
Optional equipment:
Product dimensions, distances
Technical data in accordance with EN 13229
Nominal heat output:
Efficiency:
CO emissions (13% O2):
CO emissions (13% O2):
OGC emissions (13% O2):
Dust emissions (13% O2):
Flue gas temperature:
Flue gas flow rate:
Chimney draft, EN 13229:
Recommended draft with smoke outlet:
Fuel consumption:
Kindling quantity; nominal
Max. kindling:
time
Operation:
Particulate emission in accordance with NS 3059: 1.88 g/
kg dry wood
Intermittent operation means normal use of a fireplace.
This means that to refuel the fire, you add more wood
as soon as the previous load of wood has burned
down to embers
Cast iron
Black paint
Wood
50 cm
Top/back outlet or 90o bend.
Ø 150 mm.
(110 kg + 276 kg)
Adapter for outside air
connection and Kit for Ø 80
outside air hose.
See fig. 1a
7 kW
77%
0.07%
884 mg/Nm3
60 mg/Nm3
14 mg/Nm3
305°C
7.1 g/s
12 Pa
16-18 Pa
2.3 kg/h
1.7 kg
3.0 kg each
and 3.5 kg/h
Intermittent