Klarstein Pasadena Handbuch Seite 26

EN
26
How to change your cylinder
• Choose the proper regulator according to appliance category and gas pressure in
the table above, for example, Use 37mbar regulator with appliance category I3+
for propane gas.
• Marking on injector, for example,0.82 indicates that the size of the injector is
0.82 mm.
How to connect a gas bottle
1. Turn the orange cap so that the arrow is pointing to the gap in the shroud.
2. Remove the orange safety cap by pulling the lanyard out, then out. Do not use
tools. Leave the cap hanging.
3. Check that the black sealing washer is fitted inside the cylinder valve. Connect the
regulator to the valve.
4. Turn the switch clockwise on gas bottle-then turn on the gas grill as instructed.