Heating Mode - Poolex NANO Turbo Installations- Und Gebrauchsanleitung

Step 1 : Press
to switch on your pump.
Step 2 : Press to switch from one mode to another until the cooling mode is displayed.
Step 3 : Using buttons
EXAMPLE :
If the current temperature is 30°C, default setting temperature is 27° required temperature is 15°C.
Current water
temperature
Useful information about how the cooling mode operates
When the incoming water temperature is greater than or equal to the required temperature
(setpoint temperature) + X°C, the compressor will switch to cooling mode. The compressor will
stop when the temperature of the incoming water is less than or equal to the required temperature
(setpoint temperature).
Indicators for adjustment range X
X : adjustable parameter from 1° to 15°C, default setting is 3°C. (Parameter N°6)
4.4

Heating Mode

WARNING: Before starting, ensure that the filtration pump is operating correctly.
Step 1 : Press
to switch on your pump.
Step 2 : Press to switch from one mode to another until the heating mode is displayed.
Step 3 : Using buttons
EXAMPLE:
If the current temperature is 15°C, default setting temperature is 27° required temperature is 30°C.
4. use
and select the required temperature.
Required
temperature
and select the required temperature.
EN | 17