Disc Operation - Seg DVRH6-160 Bedienungsanleitung

Disc Operation

Introduction
The Disc Operation means operations done to recordable discs in the drive, including browsing disc information,
finalizing a disc, removing disc content, deleting the last title, setting compatibility and write protection, etc.
Enter the Disc Operation Mode
When the system detects DVD+R or DVD+RW disc in the drive, press the
the mode.
Menu Description
The control bar menu under this mode is as shown in the chart.
The meanings for the icons are as follows.
1. Play: Play the content of the current disc.
2. Erase Optical Disc: Once this operation is done, all content in the disc will
be removed completely. The disc index will appear as blank on the screen.
3. Rename Disc: Rename the disc (default name: MY DVD).
4. Record a new title: Add a new title to record.
5. Overwrite Disc: An operation on a recorded DVD+RW disc to
overwrite its previous content.
6. Lock Disc:. This function prevents the deletion of recorded content.
Operation Steps
Erase Optical Disc
This operation is effective for DVD+RW discs. In the Disc Operation
control bar menu, use the or button to select the
option, press the SELECT button and a warning message pops up, This
operation will erase all data on the disc. Are you sure you want to continue .
Press the button to select Yes , and then press the SELECT
to confirm. Then the system will start erasing the disc.
The Erase Disc operation may take some time. During the operation, do not conduct any other operation,
including standby; once the operation starts, it cannot be cancelled midway. Never switch off the power
dur ing th e operation; otherwise the disc may be damaged.
Lock Disc
This operation will cancel the write protection of a locked disc. This function is available only for DVD+RW
discs.
1. In the Disc Operation control bar menu, use the
press the SELECT button.
To judge if a disc is write-protected, try the
cannot be recorded, erased or edited unless the write protection is canceled.
24
DIS C O PER bu tto n to enter
DVD+RW:
Play
Rename Disc
Erase Optical Disc
Record a New Title
Overwrite Disc
Lock Disc
DVD+RW:
Play
Rename Disc
Erase Optical Disc
Erase Optical Disc
Record a New Title
Overwrite Disc
button
Lock Disc
or button to select the Lock Disc item, and then
Browse Disc Information operation. A write-protected disc
Play Mode
Play Mode Control
There are four playing modes for the unit, including Normal Play, Repeat Play, Prog ram Play and Random Play.
The operations are as follows.
Normal Play
1. Enter the control bar menu.
2. Press the , and SELECT buttons to select the first item in
the control bar, Play Mode.
3. Press the or button to select the Normal Play value, and then press the
Normal Play mode.
4. Pressing the PLAY button directly is another way preform Normal Play.
Repeat Play
There are various Repeat Play modes, including Repeat Title (DVD only), Repeat Chapter (DVD only), Repeat
Disc (DVD/SVCD/VCD), A-B Repeat, etc.
1. In the play control bar menu, press the , and
Control.
2. Use or button to select a proper value, press the
sponding Repeat Play mode.
3. Pressing the REPEAT button directly is another way to repeat play operation.
4. If the value selected is A-B Repeat , press the
is set, please set the next point. Press the SELECT
the system will perform a section repeat play, that is, repeat from A to B.
The values of Play Mode Control Item are as follows. The values may vary for different discs.
1. Normal Play. 4. Title Repeat 7. DIR Repeat
2. A-B Repeat 5. Disc Repeat 8. Program Repeat
3. Chapter Repeat 6. Track Repeat 9. Random Repeat
Play a DVD
DVD
MODE: Normal
Trick mode:
TITLE: 01/01
CHAPTER: 02/14
AUDIO: 01/03-OTH
SUBTITLE: 01/03-OTH
ANGLE: 01/01
T-TIME: 00:02:04-00:51:25
SELECT button to enter the
SELECT buttons to select the first item, Play Mode
SELECT button and the system will play with the corre-
SELECT button and the system will indicate that Point A
button again to set the next point, i.e. Point B. After that,
29