Play Mode - Seg DVRH6-160 Bedienungsanleitung

Timer Recording
6.Set up the Recording date.
A. If you select Weekly , press the SELECT
in the row, and press the SELECT button to pop up a week lis t, as shown in the chart. Select a proper value
according to your need.
B. If you select Once press the SELECT
editor box will appear on the right. Highlight the box and press the
SELECT button, then use the number butt ons to enter the date in
the form of MM/DD/YY , press the SELECT
If the input is invalid, the system will prompt an input error message.
At the same time, the Date Input Editor Box
Please enter the date again.
7. Set up the starting time of recording: In the
use the arrow buttons and the SELECT button to highlight the
option and the input box. Enter a value between 0:00 and 23:59 with the
number buttons and press the SELECT button to confirm. This function is used to set up the starting time of the
recording. If the input value is beyond the range of 0:00-23:59, the system will give an invalid message..
8. Set up the end time of recording.
Terminated operation is similar to Step 8.This setting means: when the end time is reached, the recording process will be
stopped and the unit turns to standby status.
9.Record to source: you maybe select HDD and optical disc source.
10.Set up the record title, use or to change the letter, press select button to enter it.
11.Switch the VPS function on/off. When this function is on, the system will track down and record the TV signals
automatically according to the starting time. It can also pause or stop recording automatically according to the
information given by the TV signals. When the starting time is reached but the unit doesn't get the starting time
information, the recording will start at the scheduled starting time. When the scheduled end time is reached
and the unit doesn't get the information, the recording will end at the scheduled end time. But the unit will wait for 29
hours. If the unit receives starting time information during this time, continue recording to according to this information,
After that, if the starting time information is still not available, this setting will be cancelled. (Note:VPS feature depends
on local TV broadcast signal.)
12. After completing setup of various parameters of timer recording, highlight the OK location, press the
button, and finish setting up a timer recording schedule.
13.Press the TIMER button to exit the timer recording setup menu.
14.After setting up the timer recording schedule, configure the system according to the schedule and make sure the
system is in standby or working status.
15.If the system is conducting another operation five minutes before the schedule time, it will pop up an information
box, prompting you whether to start recording or not. If the recording condition is met, highlight the OK button and
press the SELECT button to confirm. If the information box is left unattended, the system will take it as a consent
to record. After a while, it will start the recording according to the set schedule.
16.If the system is in standby status, it will enter the recording mode automatically 3 minutes in advance and start
recording following the set schedule.
17.After completing the recording, the system will restore the status before the recording automatically.
Note
The system must be properly configured with the set values before completing expected recording jobs.
Select any timer recording item and press the
Do not use the finalized DVD+R disc
18
button to confirm. Move the cursor to the right control unit
Timer Recording Setup
button. The date input
Source
Ch042
Record To
SP
Quality HDD
Weekly
Mode
button to confirm.
Tuesday
Date
Sunday
Start
Monday
End
will be left empty.
Tuesday
Title
OFF
VPS
Item Editor dialog box, OK Cancel
Record executes every Tuesday.
Start
ADD/CLEAR button to delete it.

Play Mode

Subtitle Selection
Some DVD discs may have more than one kind of subtitle. You can select one of them as the output.
1. In the play control bar menu, select the
There are some digits under the icon. The number on the
right is the total number of subtitle langu ages provided
by the disc; the one on the left is the current selection.
The default value can be set in the
If there is a word
the subtitle is off. This value can be set in the
Setup .
2. Press the SELECT button to make the Subtitle item
available for selection.
3. Press the or
the subtitle language, and press the
confirm.
4. this function enables you to switch between subtitles by
pressing the SUBTITLE
Multi-angle Switch
For some DVD discs, the pictures are shot from different
angles at the same time. While playin g, y ou c an v iew from
different angles.
1.In the play control bar menu, select the
2.Press the SELECT button to make the
SELECT button to confirm. Then the angle will be changed.
There are some digits under the icon. The number on the right is different angles of pictures provided by the
disc; the one on the left is the current selection.
PBC ON/OFF (Available only for VCD 2.0 or above versions)
1.In the play control bar menu, select the PBC ON/OFF item.
SELECT
2.Select the On
Press the MENU
directly.
Note
The so-called PBC function indicates the menu play
mode of VCD 2.0. When the PBC is on, the system will
provide a list of all tracks. You can select to play any of
these tracks using the number buttons of the remote
control. When the PBC is off, the system will play the
disc in the normal order.
Not all VCD discs support PBC play.
Picture Zoom Function
In the playing status, the unit has the function to zoom in pictures. (Available for DVD, VCD and JPEG)
1.In the playing status, press the ZOOM button,to enlarge the picture by 150% or 200%.
2.After the picture is enlarged, use the arrow buttons
different parts of the enlarged picture.
Subtitle item.
DVD
MODE
Trick mode:
TITLE
System Setup .
Off under the icon, it indicates that CHAPTER
System AUDIO
SUBTITLE
ANGLE
T- TIME
button of the remote controller to select
DVD
SELECT button to
MODE
Trick mode:
TITLE
button directly.
CHAPTER
AUDIO
SUBTITLE
ANGLE
T- TIME
Angle item.
Angle item available for selection. Enter a number and press the
or Off value and press the SELECT button to activate or inactivate PBC function.
button to activate or inactivate PBC function
VCD
MODE:
Trick mode:
TRACK:
AUDIO:
PBC:
TIME:
, , or to move the picture so that you can view
Normal
01/01
02/14
01/03-OTH
01/01-OTH
01/01
00:02:48-00:51:25
Normal
01/01
02/14
01/03-OTH
01/01-OTH
01/01
00:02:48-00:51:25
Normal
01/01
Stereo
ON
00:02:48-00:51:25
35