System Connection For Recording External Signals - Seg DVRH6-160 Bedienungsanleitung

System Setup
To satisfy customers with different characteristics and suit related devices of different qualities, the unit provides
various functions. You can setup the system of the unit and regulate its operations to cater for your taste and suit well
with other related devices of yours. But if you think it's too complex, you may also use the default settings, which
can meet your basic demand.
Operation Interface and General Steps
This section will introduce the menu interface of the System Setup and general operation steps.
1.Press the SETUP button to enter the System Setup mode. Now the system setup control bar menu will appear
on the top of the OSD, as shown in the following chart.
The meanings of the icons are as follows.
1)Auto Chapter Marker
2) Record Quality
APS
3)
4) Modify Channel
5) Program Table
6) Timer Setting Menu
Country Selection
7)
2.Use the or button to select items to be setup in the control bar and press the
setup menu of the item. In the setup menu of a certain item, press the arrow buttons and the
to operate some control units, and the corresponding settings will be done.
3.Press the RETURN button to return to the upper level menu. Press the SETUP
setup mode.
Note
The steps above are general and typical operations. Some settings might not need a certain step, or require more
steps.
Please set up the system in the Eject Disc mode or No Disc mode, otherwise some settings cannot be done.
Auto Chapter Marker
1.In the Recording Settings menu, use arrow buttons to select Automatic Chapter Marker , and press the
SELECT button to drop down a menu.
2. Use the or button to select a proper value ( 5min, 10min,
20min, 30min or off ), and press the SELECT button to
confirm.
3. Press the RETURN button to return to the upper level
menu and set up other items.
* Use different time option to insert chapter markers at
x-minute intervals during recording.
40
SETUP MENU -RECORDING
Auto Chapter Marker Off
Record Quality SP
APS SCAN
Modify Channel EDIT
1
Program Table SORT
Timer Setting Menu OK
Country Selection Deutschland
SELECT button to enter the
SELECT button
button to exit the System
SETUP MENU -RECORDING
Auto Chapter Marker Off
Record Quality SP
APS SCAN
Modify Channel EDIT
1
Program Table SORT
Timer Setting Menu OK
Country Selection Deutschland
System Connection
System connection for recording external signals (front panel signal )
When connecting with external signals, be sure to switch off the power source of the unit and other devices.
The connection with front panel inputs
The thick side
is downward
DIGITAL
Vidicon
NOTE
Refer to the manual of the connected system.
Turn off the power and unplug both units before setting up
any connections.
System connection for recording external signals (rear panel signal input)
Connection using rear panel inputs
Cb/Pb Y VIDEO VIDEO L
C SL L
SW SR R Cr/Pr Coaxial
S-Video S-Video R
5.1CH AUDIO OUT VIDEO OUT DIGITAL OUT VIDEO OUT VIDEO I N ANALOG AUDIO SCART IN
OUT IN
Video lnput
Audio lnput
or
DVD Player
From the video input terminals, select one as desired. In terms of picture quality, CVBS stands for good,
S-VIDEO for better .
RECORDER FRONT
OPEN/CLOSE RECORD PLAY PAUSE STOP SOURCE
RF Input
IN
TV
OUT
ANTENNA
SCART OUT
SCART OUTPUT
13