Chapter Editing; Introduction; Menu Description; Operation Steps - Seg DVRH6-160 Bedienungsanleitung

Play Mode
The Use of the GOTO Button
1. In the playing status, press the GOTO
With the above-mentioned operations, you can use the remote control to enter the corresponding value and skip
to the corresponding location directly.
The following is an example of DVD playing. The operation of VCD playing is similar to this case.
For CD and MUSIC discs, it is no use pressing the
TITLE:--
DVD
D-TIME:--
VCD
Audio Selection
Some DVD discs may have more than one OSD language. You may select one of them as the output.
1. In the play control bar menu, select the Audio item.
There are some digits under the icon. The number on the
right is the total number of OSD languages; the one on the
left is the number of the current mode.
2.Press the SELECT button, use the
to select the Audio item, and press the
button of the remote control to confirm.
3.This function enables you to switch between different
languages by pressing the AUDIO button directly.
Audio Channel Selection
This function is available for CD, VCD and MUSIC discs.
1.In the play control bar menu, press the or
to select the Audio item, press the SELECT
button to confirm and enter the input mode.
2.Use the or button to select Stereo , Right
or Left , and press the SELECT button to confirm.
3.This function enables you to switch between different
channels by pressing the AUDIO button directly.
34
button to cycle through various options in the play control bar menu.
GOTO button.
CHAPTER:-- TIME:--:--:--
TR-TIME:--:--:--
DVD
MODE Normal
Trick mode:
or button CHAPTER 02/14
SELECT AUDIO 01/03-OTH
SUBTITLE 01/01-OTH
ANGLE 01/01
T- TIME 00:02:48-00:51:25
VCD
button
MODE: Normal
Trick mode:
AUDIO: Stereo
PBC: ON
TIME: 00:02:48-00:51:25

Chapter Editing

Introduction

For finalized discs, every title consists of only one chapter. There is no such function as selected chapter play or
random programmed play of disc segments for such discs. The index icon of each title is determined by the system.
As every title consists of only one chapter, it is inconvenient to browse the disc when you desire individualized
appreciation. The chapter editing function is to solve such problem.
Enter the Chapter Editing Mode
When the disc in the drive is DVD+RW and the system is in the DVD Monitoring mode, press
the DVD play state, select a title and press Right button to show the Edit Title Menu and select the item
Title to enter the Chapter Editing mode and the Chapter Editing control bar menu will appear.
Note
The Chapter Editing function is only available for DVD+RW discs.
If the DVD+RW disc is write-protected or the current mode does not allow the entrance of Chapter Editing mode,
the remedy for the former is to cancel the write protection with
disc operation, and in the latter case, just exit the mode.

Menu Description

The chapter editing control bar menu is as shown in the
following chart and the meanings for each item are as
follows:
1. Title:. The left number under the icon is the current
title to be edited; the right is the total number of the
titles in the disc.
2. Chapter. The left number is the current chapter; the
right is the total number of chapters in the title.
3. Play: The function is the same as the Play Mode.
4. Chapter Mark:. Split or Combine Chapter function.
5. Hide Chapter:. Hide or Show Chapter function.
6. Index Picture: Change the index picture.
7. Split Title: Split the title in two.
8. Time: Time Selection Play.

Operation Steps

Select the title to be edited
1. Enter the Editing Mode.
2. In the Editing Mode control bar menu, use the or
button to select the title.
DVD button to
Edit
Editing Mode
1
Title 04/04
2 Chapter 01/01
3
Play
4
Chapter marker
5
Hide Chapter
6
Index picture
7
Split title
8 Time: 0 00 02
Editing Mode
Title --
Chapter 01/01
Play
Chapter marker
Hide Chapter
Index picture
Split title
Time: 0 00 02
19