System Connections; Connect To A Tv - Seg DVRH6-160 Bedienungsanleitung

System Setup
If you want to edit channels for the received TV programs, select the
SELECT button to confirm, In the pop up channel edit dialog box, use the
button to select and confirm. The steps of channel edit are as follows.
Program Number Current TV program number.
Name : P003/CH031. You can change the name using the
the or button to move the cursor.
Sound Mode : PAL B/G, PAL-D/K, PAL-I, SECAM L, SECAM B/G, and SECAM D/K. Use the
and SELECT buttons to select the proper local sound mode.
Search type : Frequency and Channel. Use the
the scan mode during the scanning. Frequency: scanning by frequency in a manual scan; Channel: scanning
by uniformly allocated channel name in a manual scan.
Frequency: 551.3 MHz. When the search type is selected Frequency, this item will be shown as the frequency.
Press the or button to scan channels manually by frequency.
Channel: CH006. When the search type is selected Channel, this item will be shown as the channel. Press the
or button to scan channels manually by channel.
S-Band: S-Ch001. When the search type is selected S-Band, this item will be shown as the S-Band. Press the
or button to scan channels manually by S-Band.
Fine Tuning : Use the or and SELECT
the frequency lightly.
Delete : Press OK delete current program.
After the channel information is modified, select OK and press the SELECT button to confirm. Then return to
the Channel Scan menu.
NOTE:
When in the TV state, if the audio of channel contain the stereo sound, you can press
audio output between mono and stereo sound. Or if the audio of channel contain the dual language, you can press
Audio button to switch the Audio output among mono, dual A and dual B sound.
Program Table
If you want to sort various channels again, select the Sort
Channel Order item, press the or and SELECT buttons
to enter the Channel Sorting menu, and operate as follows.
In the left dialog box, press the or
channel to be changed.
Use arrow button to move this channel to the right dialog box, press SELECT button to confirm.
Press the or button to move this channel to a desired location.
Press the SELECT button to insert the channel. The original channel at this location will move to the next
location.
After completing the sorting, press the RETURN button to exit.
Note
Be sure to connect the antenna properly before the channel scan operation. Make sure there are TV signals at the
TV Signal Input. For the connection chart, please see the
External Signals for reference.
42
Modify Channel item, press
or button and the SELECT
or button and SELECT
or button to select this item. Then you can change
buttons to select this item and press the or
Audio button to switch the
SORT
P001 Ch029
OK
P002 Ch031
P003 Ch042
CANCEL
P004 Ch038
P005 Ch044
P006 Ch046
P007 Ch059
button to locate the
P008 -------
Basic Information: System Connection for Recording
System Connection

Connect to a TV

Before the system connection, be sure to switch off the power source of this unit and other devices.
button. Press
or
button to tune
Audio input
S-video
Video output
l There are three kinds of video outputs in the unit, namely component video, S-Video and composite video.
You can select one of the available video outputs of the TV and then make the connection.
l In terms of picture quality, the component video is the best; S-Video comes next, while the composite
video is less satisfying.
l When connecting the audio output of the unit to the TV, connect the left and right audio outputs to the TV
audio inputs of the same group as the connected video inputs.
l There is a scart output in the unit, use a scart cable to connect to the TV. A composite video (CVBS), a
component video (RGB) and audio (L & R) outputs are built in the scart output. When the scart output is
used, none of the above-mentioned cables is needed for connection.
Cr Cb Y
Component video output
Rear Panel of the Unit
VIDEO
TV C SL L Cb/Pb Y
Cr/Pr Coaxial
SW SR R S-Video
5.1CH AUDIO OUT VIDEO OUT DIGITAL OUT VIDEO OUT
OUT
S-Video Input
SCART INPUT
VIDEO L
IN
TV
OUT
S-Video R
ANTENNA
ANALOG AUDIO
VIDEO I N SCART IN SCART OUT
IN
11