Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Contents
1
About this Instruction Manual ............ 31
1.1
Important information ............................. 31
1.2
2
Safety Instructions .............................. 31
2.1
Workplace safety .................................... 32
2.2
Electrical safety ...................................... 32
2.3
Safety of people ...................................... 32
2.4
Using and handling the power tool ......... 33
2.5
Service .................................................... 33
2.6
2.6.1
Operating personnel requirements ........ 33
2.6.2
Workplace safety .................................... 33
2.6.3
Electrical safety ...................................... 34
2.6.4
Safety of people ...................................... 34
2.6.5
power tool ............................................... 36
2.6.6
drill stand ................................................ 37
2.6.7
Service / Maintenance / Repair .............. 37
2.6.8
machine .................................................. 38
3
Technical Characteristics ................... 39
3.1
Technical specifications ......................... 39
3.2
EC Declaration of Conformity ................ 40
3.3
Machine characteristics ......................... 40
3.4
Machine parts and controls .................... 40
3.5
Intended use ........................................... 41
4
Before Starting Work ........................... 41
5
Held Operation ..................................... 42
5.1
core drill bit ............................................. 42
5.2
Connecting the water supply ................. 43
5.3
(accessories) .......................................... 43
5.4
and drilling .............................................. 43
5.5
Ending the drilling process ..................... 44
6
Stand-Guided Drilling .......................... 45
6.1
6.1.1
Fixing onto the wall ................................. 45
6.1.2
kit (accessory) ........................................ 45
6.2
Adjusting the tilt at the drill stand ........... 45
6.3
stand ....................................................... 45
6.4
Set guide clearance on spindle head ..... 45
6.5
and drilling .............................................. 46
6.6
Ending the drilling process ..................... 46
| 30 |
7
Cleaning ................................................. 47
8
Maintenance .......................................... 47
9
10
Disposal ................................................. 48
11
Tools and Accessories ........................ 48
12
Scope of Supply ................................... 49
13
Warranty ................................................ 50
Imprint
Version V02 / 2019-03
Copyright:
Maschinenfabrik
OTTO BAIER GmbH
Heckenwiesen 26
71679 Asperg
Germany
It is prohibited to forward or reproduce this
document or to exploit and disclose its contents,
unless expressly permitted. Any infringements will
result in liability to pay compensation for damages.
All rights reserved in case of patent, utility model or
design registration.
This instruction manual has been prepared with
the greatest possible care. Nonetheless, OTTO
BAIER GmbH does not accept any liability
whatsoever for possible errors in this instruction
manual and their consequences. Equally, no liability
whatsoever is accepted for direct or consequential
damage or losses resulting from improper use of the
machine.
The national health and safety regulations and the
requirements of this instruction manual are to be
observed when using the machine.
All product names and brand names used are the
property of the holder and are not explicitly marked
as such.
Subject to change without notice.
Werbung
Kapitel
Inhaltsverzeichnis
