Siemens SITRANS LR200 Kurzanleitung Seite 11

Key functions in Measurement mode
Key Function
Mode opens PROGRAM
mode.
RIGHT arrow
opens PROGRAM mode.
UP or DOWN arrow
toggles between linear units
and percent.
Updates internal enclosure
temperature reading.
Updates echo confidence
value.
Updates distance measure-
ment.
Programming SITRANS LR200
: SITRANS LR200 automatically returns to Measurement mode after a period of
Note
inactivity in PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu
level).
Settings can be modified locally via the Local User Interface or remotely via SIMATIC PDM.
The Local User Interface (LUI) consists of an LCD display and a handheld programmer.
Quick Start Wizard via the handheld programmer
• See
Quick Start Wizard via SIMATIC PDM
• See
Parameter menus
Note:
For the complete list of parameters with instructions, see the full manual. It can be
downloaded from the product page of our website at:
www.siemens.com/LR200.
Parameters are identified by name and organized into
function groups, then arranged in a 5-level menu
structure.
Accessing parameters via the
handheld programmer
1. Enter PROGRAM mode
a) Point the programmer at the display from a maximum distance of 300 mm (1 ft).
b) Press RIGHT arrow
Page EN-10 SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
Result
Opens the menu level last displayed in this power
cycle (or menu level 1, if power has been cycled since
exiting PROGRAM mode or more than 10 minutes have
elapsed since PROGRAM mode was used).
Opens menu level 1.
LCD displays measured value in either linear units or
percent.
New value is displayed in LCD secondary region.
on page 15.
1. QUICK START
2. SETUP
3. DIAGNOSTICS
to open menu level 1.
on page 12.
3.3. MEAS. VALUES
3.3.7. MIN. INTERN. TEMP.
7ML19985XD81