Kubota Z482-E3 Bedienungsanleitung Seite 14

12. WARNING AND CAUTION LABELS
13. CARE OF WARNING AND CAUTION LABELS
1. Keep warning and caution labels clean and free from obstructing material.
2. Clean warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing warning and caution labels with new labels from your local
KUBOTA dealer.
4. If a component with warning and caution label(s) affixed is replaced with a new part, make
sure the new label(s) is (are) attached in the same location(s) as the replaced component.
5. Mount new warning and caution labels by applying to a clean dry surface and pressing any
bubbles to the outside edge.
Part No.19077-8724-1 or 16667-8724-1
(55mm in diameter)
Part No.TA040-4957-1
Do not get your hands close
to engine fan and fan belt.
SAFE OPERATION
(37mm in diameter)
7